CME / Shock Bump Test Systems
KRD10 Hydraulic Vertical Shock Test System
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, square wave, and other waveform shock tests to achieve the shock wave and impact energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
- Windows-based stable control system, full-automatic remote-control interface
- Multi-track guide posts combined with good lubricity and noise-free hydraulic balance lifting system to achieve stable shifting
- Automatic control of lifting height with high accuracy and good repeatability
- Adopts the high strength and hardness cast aluminum table, which has a high first-order resonance frequency, featured with low noise and no clutter
- Built-in brake mechanism to avoid secondary rebound collisions and more secure positioning of the table
- Multiple waveforms: it can perform conventional half-sine waves, post-peak sawtooth waves, or square waves
- One-stop test: built-in test standards meet various requirements to help users to complete tests in one-stop
- Optional foundation-free: Air springs and dampers are used to reduce vibration.
KRD11 Pneumatic Vertical Shock/Bump Test System
KRD11 series pneumatic vertical shock/bump test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of the products. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests.
- Pneumatic drive without hydraulic leak risk and keep the environment clean.
- Maximum shock rate up to 120 times / min.
- It can easily realize large pulse width and small overload test.
- The speed and rate of shock can be easily controlled by adjusting the gas pressure.
- IPS-2000 shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
- Built-in brake mechanism ensures the safety of operation in any situation.
- Optional foundation free: air springs and dampers are used to reduce vibration.
KRD12 Pneumatic Horizontal Shock Test System
KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, or square wave shock test to realize the shock energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
- Windows-based stable control system, full-automatic remote-control interface
- Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
- Trapezoidal guide posts: large supporting force, good lubricity and full-automatic positioning table.
- Automatic control of shock speed: the shock overload value is achieved by adjusting the air pressure. After the cylinder pressure is set, system will automatically control the shock speed with high accuracy and good repeatability.
- Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
- The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
- Multiple waveforms: can perform conventional half-sine waves, post-peak sawtooth waves, or square waves.
- Integrated control & measurement system: the system comes with a variety of waveform tolerance bands that comply with the MIL-810 standard, automatically generates test reports after the test is completed.
- Bidirectional shock: the system can be designed as a bidirectional shock according to user needs, saving test time more effectively.
- Optional foundation free: air springs and dampers are used to reduce vibration.
KRD13 High Acceleration Shock Test System
KRD13 series high acceleration shock test system is specially designed to meet the requirements of the military industry and battery test. The system adopts the principle of pneumatic energy storage expansion, by adjusting the internal pressure, it releases high impact energy in a short stroke. It is suitable for assessing the functional reliability and structural integrity of various products under high energy shock or bump environments, so as to reproduce the shock wave energy suffered by-products in the actual environment, thereby improving or optimizing the structural design or layout of the products.
- Windows-based stable control system, full-automatic remote-control interface
- Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
- The shock energy is large, and the shock test of 70g～45ms can be easily realized.
- Automatic control of lifting height with high accuracy and good repeatability
- Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
- The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
- Built-in pneumatic brake mechanism, safe and reliable.
- IPS-2000 shock control and measurement system can perform different shock waveforms.
- Optional foundation free: Air springs and dampers are used to reduce vibration.
KRD16 High Impact Shock Test System
High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. The purpose of these requirements is to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of nuclear or conventional weapons.
CME provides lightweight & medium-weight high-impact shock test systems in accordance with one of the following test categories, as specified.
- Lightweight. The lightweight test is a test performed on the lightweight shock machine. The weight of the test item including the fixture to attach it to the test machine shall be less than 550 pounds.
- Medium weight. The medium-weight test is a test performed on the medium-weight shock machine. The weight of the test item including the fixture to attach it to the test machine shall be less than 7,400 pounds.
KRD17 Pneumatic Bidirectional Vertical Shock Test System
KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not easy to turn over, especially for battery testing. It can complete vertical upward and downward shock tests.
- Windows-based stable control system, full-automatic remote-control interface
- Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
- Bidirectional vertical shock mechanism, to complete the upward and downward shock and bump tests.
- Automatic control of lifting height with high accuracy and good repeatability
- Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
- Built-in double-brake system, safe and reliable.
- IPS-2000 shock control and measurement system can perform different shock waveforms.
- Optional foundation free: Air springs and dampers are used to reduce vibration.
KRD20 Pneumatic Bump Test Machine
KRD20 series pneumatic bump test machine is suitable for evaluating electronic components, equipment and other electrical and electronic products undergoing repeated impact stress during production, transportation, use and maintenance, in order to evaluate and confirm the functional reliability and structural integrity of the product under the impact environment, so as to improve and optimize the structural design or layout of the product.
- Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability.
- Control the frequency of bumps by adjusting the gas pressure to achieve continuous high-frequency bumps.
- Test time and bump frequency can be set arbitrarily, and it will stop automatically after the test is completed
- The controller has door protection, overspeed protection and zero signal protection to ensure the safety of the system.
- The drop height is adjustable, only need input the overload value; adaptive adjustment of the collision process to ensure the repeatability.