High Performance, USB, Ethernet, WiFi
- USB, Ethernet, and WiFi connectivity
- Fully compatible with Modbus TCP
- 14 analog inputs
- 16+ bits of resolution
- T7-Pro: Up to 22-bit resolution
- ±10V, ±1V, ±0.1V, and ±0.01V ranges
- 100k samples/s max stream rate
- Expand to 84 channels with Mux80
- Optional NIST traceable Calibration Certificate.
- AIN-EF: Hardware scaling & processing
- 2 analog outputs
- 23 digital I/O
- Up to 12 timer and counter features
- Run Lua scripts in hardware
Low-cost USB and Ethernet
- USB and Ethernet connectivity
- Fully compatible with Modbus TCP
- Up to 12 analog inputs
- 12-bit resolution
- 4 dedicated ±10V analog inputs
- Up to 8 0-2.5V analog inputs
- 50 ksamples/s max speed
- AIN-EF: Hardware scaling & processing
- 2 analog outputs
- Up to 16 digital I/O
- Up to 10 timer and counter features
- Run Lua scripts in hardware
Our Most Affordable DAQ
- USB Connectivity
- Up to 16 analog inputs
- 12-bit resolution
- Some 0-2.4V range and some ±10V range
- 50 ksample/s max stream rate
- 2 analog outputs
- Up to 20 digital I/O
- 2 timers and 2 counters
Exceptional Price and Performance
- USB Connectivity
- 14 high quality analog inputs
- 16+ bits of resolution
- U6-Pro: Up to 22-bit resolution
- ±10V, ±1V, ±0.1V, and ±0.01V ranges
- 50 ksamples/s max stream rate
- Expand to 84 channels with Mux80
- Optional NIST traceable Calibration Certificate.
- 2 analog outputs
- 20 digital I/O
- 4 timers and 2 counters
The Original USB and Ethernet DAQ
- USB and Ethernet connectivity
- 14 analog inputs
- 12–16 bit resolution
- UE9-Pro: Up to 20-bit resolution
- ±5V and 0-5V ranges
- 50 ksamples/s max stream rate
- Expand to 84 channels with Mux80
- 2 analog outputs
- 23 digital I/O
- 6 timers and 2 counters
The Original LabJack
- Our original groundbreaking USB DAQ device
- 8 analog inputs, 12 bit resolution, 1.2 ksamples/s
- 2 analog outputs
- 20 digital I/O
- 1 counter
LJTick-VRef
The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V or 4.096V signal.
CB37 Terminal Board
Provides convenient screw terminals for the DB37 connector on the LabJack T7.
CB15 Terminal Board
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices.
Mux80 AIN Expansion Board
Analog input expansion board that adds 80 analog input channels.
3ft DB37 M/F Serial Cable
A three foot DB37 cable, useful for connections between the Mux80 and CB37 Terminal Board(s).
LM34CAZ Silicon Temperature Sensor
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements.
EI1050 Digital Temperature Humidity Probe
Uses two digital lines on any LabJack to retrieve temperature and relative humidity measurements.
EI1034 Temperature Probe
Easy to use and very accurate temperature probe from Electronic Innovations Corp.
EI1022 Temperature Probe
Easy to use and inexpensive temperature probe from Electronic Innovations Corp.
RB16 Relay Board
Provides 16 industry standard relay module sockets to a LabJack U12.